SSF announces two new utility modules coming soon...

CLONE

CLONEsm.jpg

CLONE is a 3hp, High fidelity Multiple featuring two 1x4 buffered multiples.

Multiple B is normalized from multiple A to provide 1x8 multiple capability.

CLONE allows for signal multiplication with extremely low degradation and each section is capable of driving an equivalent load impedance of 600 Ohms without distortion and extremely low signal loss.

We use audiophile grade active components to ensure signal integrity and fidelity across the audio and low frequency spectrum, ensuring practically zero loss of your multiplied signals.

In light of modular making it's way into polyphonic territory, 1:4 multiples are necessary to accommodate 4 voice polyphonic modular systems.

 
DETECTRx_rev2_SM.jpg

DETECT-Rx features three useful utilities to expand your modular capabilities.

EXTRACT-R is a voltage controlled comparator with three selectable range settings, LINE LEVEL, 5V and 10V. A Threshold knob sets the trip point to extract a 10V gate signal. CV input allows for PWM and voltage control of the comparator threshold.

RECTIFY-R is a simple positive voltage rectifier for octave-up and rectifying bipolar signals into positive only signals. Signals patched into the DETECT-R are routed to the RECTIFY-R section.

DETECT-R is a versatile Envelope Follower designed to offer maximum control of the envelope based on signal level and frequency content. This is accomplished with three selectable frequency ranges, an additional envelope smoothing control and an envelope gain control offering up to 27dB of input gain to accommodate line and low level signals and overdriving the envelope.

Some convenient Jack normalizations are provided:

Patching into the DETECT-R only; will normalize the input into the EXTRACT-R and RECTIFY-R, providing all outputs from a single input.

A signal 'THRU' buffers the input signal going into the DETECT-R so that it can be routed to the input of a filter or other module to be processed by the resulting envelope.

Patching into the EXTRACT-R only; will normalize the GATE output into the Envelope DETECT-R input, producing an extracted GATE based envelope at the EXTRACT-R's output.

All normalizations break if additional inputs are utilized, with exception of the RECTIFY-R, which is always routed from the DETECT-R input.